25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs.
1 x USB 2.0 high speed interface for configuration and firmware updates.
Optical isolators triggered by connection to ground. Max 5V at 14mA.
Mechanical relay contact closure to ground. Max 30V at 1A.
10/100 BaseT with loop through for connecting to other ethernet enabled equipment.
Configured via ATEM Switcher Utility.
Internal Software Upgrade
Firmware built into software driver. Loaded at system startup or via updater software.
12V power supply included with international socket adaptors for all countries.
0° to 40° C (32° to 104° F)
-20 – 60 degrees celsius
Up to 95%
GPI and Tally Interface